MSS40.7-1300-SX 移动模架管理手册

依 法 建 设

科 学 稳 中 管 理

求 进

目 录

一、日常管理小组 二、现场作业组织

············································1 ············································2

·······································2

··················4

三、移动模架工作流程

3.1移动模架作业流程 ··································2

3.1.1移动模架首跨施工步骤

3.1.2移动模架标准跨施工步骤 ·············8 3.2现场工作流程 ······································12 3.3现场指挥通讯系统 ·································13 四、移动模架作业安全标准

····························13

4.1 一般规定 ···········································13 4.2 关键工序检查控制点 ···························18

4.2.1主梁吊装前 ·································18 4.2.2堆载试验前 ·································18 4.2.3混凝土浇筑前 4.2.5移动模架走行

···························18 ···························20

4.2.4移动模架纵移前 ···························19 4.3 重要部位检查控制点 ···························20 五、维修保养及日常检查 ·································21

5.1维修保养措施 ······································21

5.1.1金属结构的维护：···························21 5.1.2液压系统维护

···························21

5.1.3电气系统维护： ···························22

5.1.4润滑 ··········································22

···························23

5.2维保及检查管理办法

六、安全操作规程及作业注意事项 ······················24

6.1概述 ·················································24 6.2移动模架必须检查的项目及其注意事项：······26 6.3防风锚固 ···········································27 6.4模架施工作业操作规程及其注意事项：

······28

6.4.1落模：··········································28 6.4.2横向开模：····································29 6.4.3纵向开模：····································30 6.4.4自动倒运中支腿：···························31 6.4.5纵移过孔：····································31 6.4.6合模+升模+调整锚固到位：···············32 6.4.7同步精确安装前辅助支腿：···············33 6.5.1模架调整模床姿态操作规程：·············33 6.5.2浇筑混凝土注意事项：······················33 6.5.3金属结构注意事项：·························34 6.5.4液压系统操作注意事项：（具体见液压说明书）··34 6.5.5电气系统操作注意事项：··················34

七、管理用表

·················································35

···········································35 移动模架堆载试验前检查移动模架主梁吊装前检查

机械运转手册 MSS40.7-1300-SX

表·················38

MSS40.7-1300-SX

表·················39