可提供的功率更大的功率,但是如果使用节流功能可以引导。 关闭系统电源,降低硬件配置,或者安装较高功率的电源设备,然后重新启动系统。
错误代码 消息信息 MEM0701消息
Correctable memory error rate exceeded for
MEM0702消息
Correctable memory error rate exceeded for
LCD 消息
Correctable memory error rate exceeded for
Memory mirror redundancy is lost. Check memory device at location(s)
LCD 消息
Memory mirror lost on
MEM1208消息
Memory spare redundancy is lost. Check memory device at location
LCD 消息
Memory spare lost on
MEM8000消息
Correctable memory error logging disabled for a memory device at location
LCD 消息
SBE log disabled on
PCI1302消息
A bus time-out was detected on a component at bus
141
错误代码 消息信息 PCI1304消息
An I/O channel check error was detected.(检测到 I/O 通道检查错误。)
LCD 消息
I/O channel check error detected. Power cycle system.(检测到 I/O 通道检查错误。系统电源关闭然后打开。)操作关闭并打开输入电源,更新组件驱动程序,如果设备可卸下,则重新安装设备。
PCI1308消息
A PCI parity error was detected on a component at bus
LCD 消息
PCI parity error on bus
PCI1320消息
A bus fatal error was detected on a component at bus
LCD 消息
Bus fatal error on bus
PCI1342消息
A bus time-out was detected on a component at slot
级,或系统可能无法运行。操作关闭并打开输入电源,更新组件驱动程序,如果设备可卸下,则重新安装设备。
PCI1348消息
A PCI parity error was detected on a component at slot
LCD 消息
PCI parity error on slot
PCI1360消息
A bus fatal error was detected on a component at slot
LCD 消息
Bus fatal error on slot
142
错误代码 消息信息
操作关闭并打开输入电源,更新组件驱动程序,如果设备可卸下,则重新安装设备。 PDR0001消息
Fault detected on drive
LCD 消息
Fault detected on drive