trunk_mode : LACP

trunk psc : SRC and DST MAC auto_negotiation : DISABLE duplex : FULL flow_switch : DISABLE mac_learning_switch : ENABLE pri_enable : DISABLE priority 0 : speed 3 : wan_lan_mode 1 : work_mode 0 : jumbo_frame 0 : trunk 2 info :

portId(option):19:4 20:4 . master_port 19:4, trunk_mode : LACP

trunk psc : SRC and DST MAC auto_negotiation : ENABLE duplex : HALF flow_switch : DISABLE mac_learning_switch : ENABLE pri_enable : DISABLE

priority 0 : speed 0 : wan_lan_mode 1 : work_mode 0 : jumbo_frame 0 : trunk 3 info : portId(option):. trunk 4 info : portId(option):. trunk 5 info : portId(option):. trunk 6 info : portId(option):. Admin\\interface#

2、设置管理VLAN、管理IP

2.1 设置管理VLAN、管理IP

Admin\\service#set manage vlan name vid <1-4095> inputport [untagged|tagged] Admin\\service#set {}*1

manage

vlan

name

ip

Admin\\service# et manage vlan name ZJNM-FH10G-OLT0001 vid 50 inputport 19：1 tagged

//南门局点 管理VLAN为50 上联端口 19：1 （19：1 默认为trunk 1的主用端口 ）

Admin\\service#set manage vlan name ZJNM-FH10G-OLT0001 ip 9.100.21.149/30 （9.100.21.150）（设置的网关IP将自动转换成一条默认静态路由） //管理IP 9.100.21.149 掩码 255.255.255.252 网关 9.100.21.150

2.2 查询管理vlan、管理IP

Admin\\service#show manage_vlan all //查询管理vlan 管理 ip信息

Admin\\service# show manage_vlan all manage vlan: 50, name: manage vlan 50: port(Tag|Utag) : trunk:1 [T] Device: sub Unit: 50

Ethernet address: 34:bf:90:74:ae:1f Total protocols:0

Inet: 9.100.21.149 mask: 255.255.255.252 RX packets: 0 TX packets: 376285 RX bytes: 0 TX bytes: 165319730

MTU: 1492 Admin\\service#

三、设置SNMP信息

1、配置OLT设备 SNMP参数

Admin\\service# set snmp community readonly xxxxxxxx //只读团体名Admin\\service# set snmp community readwrite xxxxxxxx //读写团体名

Admin\\service# show snmp community //查询snmp读写口令

Admin\\service# set snmp community readonly zj511_ro //读口令zj511_ro Admin\\service# set snmp community readwrite js511_rw // 写口令 js511_rw Admin\\service# show snmp community // 查询读写口令 Read-only Community String is :[zj511_ro] Read-write Community String is :[js511_rw] Admin\\service#

2、配置snmp trap接受地址、端口号

Admin\\service# service snmp trap [enableldiable] // snmp trap 使能/去使能 Admin\\service#

Admin\\service#set snmp trapreceiver add x.x.x.x version v2c community