port=5061 for example

secret=password

type=user

username=PSTN

Leave \

Then add a DID Route of T0298765432 (for example), which goes to your chosen Destination. (Source reference: Colin Swan)

See the alternative configuration that I am currently using for the PSTN Tab in Notes

Also see Eliminating echo problems in Appendix E.4 in Sipura SPA-3000

asterisk gui界面配置及nat 等配置注意事项

1、无法获取用户的状态或者web界面密码用户有误

请配置/etc/asterisk/manager.conf [general] enabled = yes webenabled = yes port = 5038 httptimeout = 60 bindaddr = 0.0.0.0 [sunboil] ；用户名 secret = sunboil ；密码

read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan write = system,call,agent,user,config,command,reporting,originate

2、 web界面无法工作

请配置/etc/asterisk/http.conf [general] enabled = yes bindaddr = 0.0.0.0 bindport = 8088 enablestatic = yes 3、 视频、编码、nat 等问题

主要是配置/etc/asterisk/sip.conf,对它的参数进行简单说明： [general]

context=default ；这里设置sip用户的拨号路由，在extensions.conf中的[default] allowoverlap=no ;

bindaddr=0.0.0.0 ；设置为0.0.0.0表示接收所以的port的请求 videosupport=yes 视频的支持

externip=119.145.165.218 如果cs在nat里面必须设置此ip

localnet=10.168.0.0/255.255.0.0 ；这个必须设置对。根据具体测试环境进行相应配置 canreinvite=yes；此配置没有太大的影响； nat=yes；如果有nat那必须配置

? 回复