本科生毕业设计（论文）
transition layer, called the PN junction. In some semiconductor materials in the PN junction, the injection of a small number of carrier-carrier and the majority of the extra time will be in the form of light energy to release, thus the power to direct conversion of solar energy. PN junction on reverse voltage, a few hard-carrier injection, it is not luminous. This use of injection electroluminescent diodes is produced by the principle of light-emitting diodes, commonly known as LED. When it in a positive state of the work (that is, at both ends with forward voltage), the current flows from the LED anode, cathode, semiconductor crystals on the issue from the ultraviolet to infrared
light of different colors, light and the strength of the currents.
Instruments used for the first LED light source instructions, but all kinds of light colored LED lights in traffic and large screen has been widely applied, have a very good economic and social benefits. The 12-inch red traffic lights as an example, is used in the United States have long life, low-efficiency 140 watt incandescent lamp as a light source, it produced 2,000 lumens of white light. The red filter, the loss-90 percent, only 200 lumens of red light In the light of the new design, Lumileds companies have 18 red LED light source, including the loss of circuit, a total power consumption of 14 watts to generate the same optical effect. Automotive LED lights is also the source of important areas.
For general lighting, people need more white light sources. The 1998 white LED successful development. This is the GaN LED chip and Yttrium Aluminum Garnet (YAG) package together cause. GaN chip of the Blu-ray (λ p = 465nm, Wd = 30nm), made of high-temperature sintering of the Ce3 + YAG phosphors excited by this Blu-ray after irradiating a yellow, the peak 550 nm. Blue-chip installed in the LED-based Wanxing reflection in the cavity, covered with a resin mixed with YAG thin layer, about 200-500 nm. LED-based tablets issued by the Blu-ray absorption part of the phosphor, the phosphor another part of the Blu-ray and a yellow light mixed, can be a white. Now, the InGaN / YAG white LED, YAG phosphor by changing the chemical composition of the phosphor layer and adjust the thickness of the 3500-10000 K color temperature can be colored white. This blue LED through the method by white, constructed simple, low-cost, high technology is mature, so use the most.
In the 1960s, the use of science and technology workers semiconductor PN junction of The principle of developing a LED light-emitting diodes. At that time, the development of LED, the materials used are GaASP, its luminous color is red. After
40
本科生毕业设计（论文）
nearly 30 years of development, and now we are very familiar with the LED, has been sent to red, orange, yellow, green, blue, and other shade. However lighting necessary for white LED light only in recent years to develop, readers here to tell us about lighting with white LED
Conductor light-emitting diode (LED) as a third-generation semiconductor lighting source. This fantastic product has a lot of advantages: (1) efficient light: spectra of almost all concentrated in the visible light frequency, the efficiency can reach 80% -90%. The luminous efficiency of incandescent visible light efficiency of almost 10% -20% only (2) high quality of light: not as a result of spectrum UV and infrared, there is no heat, no radiation, is typically a green light illumination. (3)energy consumption of the small: single power generally 0.05-1w, through the cluster can be tailored to meet different needs, and waste very little. As a light source, under the brightness in the same power consumption of only ordinary incandescent 1/8-10.(4) long life: flux attenuation to 70% of the standard life expectancy is 100,000 hours. A semiconductor light can be used under normal circumstances 50 years, even if the long life of the people, life will be used up to two lights. (5) durable and reliable: No tungsten wire, glass and other easily damaged components, non-normal retirement rate is very small, very low maintenance costs. (6) the application of flexibility: small size, can flat pack, easy to develop into a short thin products, make point, line, face various forms of specific applications. (7) Security: working voltage 1.5-5v or less in between the current 20-70mA in between. (8) green: recyclable waste, no pollution, unlike fluorescent lamps containing mercury as ingredients. (9) response time is short: to adapt to frequent and high-frequency switching operation of occasions.
Green lighting, Energy conservation, not only responds the government building \and environment-friendly society\requirement, but also radically reduces the environmental pressure of economic growth. The advent of LED products, will effectively promote the realization of scientific concept of development, realize the sustainable development of society, and achieve win-win economic and social benefits - which are at a new starting point, to the historical mission and commitment of people-oriented lighting technology.
Changing traditional methods of lighting, LED is the solid-state semiconductor which transfers electricity directly into the visible light, LED has become the innovation of light world, LED is the essential green technology revolution to human.
41
本科生毕业设计（论文）
LED lighting products with DC drives, ultra-low power consumption, and electro-optical conversion close 100%, Compared with traditional light, it saves more than 80% light energy based on the same lighting effect .Under the appropriate current and voltage driver, the working life can reach 60,000to 100,000 hours, which is 10 times more than the traditional illuminant. Meanwhile, without Starter and Ballast, LED light has fast start-up, without strobe, soft light, pure spectrum, high CRI, be helpful for visual protection and physical health, create a harmonious and comfortable living environment.
On behalf of High Point technology representative of Semiconductor optoelectronic devices, LED products will constantly break scientific record; achieve higher luminous efficiency, more powerful, smaller, more pure spectrum, and intelligent control. With the maturing of LED technology, declining trend of manufacturing costs, In the near future, LED lighting will replace the full range of traditional lighting, bring revolutionary change for everyone’s work and life.
LED照明技术概述
LED概述
LED（Light Emitting Diode），发光二极管，是一种固态的半导体器件，它可以直接把电转化为光。LED的心脏是一个半导体的晶片，晶片的一端附在一个支架上，一端是负极，另一端连接电源的正极，使整个晶片被环氧树脂封装起来。半导体晶片由两部分组成，一部分是P型半导体，在它里面空穴占主导地位，另一端是N型半导体，在这边主要是电子。但这两种半导体连接起来的时候，它们之间就形成一个“P-N结”。当电流通过导线作用于这个晶片的时候，电子就会被推向P区，在P区里电子跟空穴复合，然后就会以光子的形式发出能量，这就是LED发光的原理。而光的波长也就是光的颜色，是由形成P-N结的材料决定的。
LED历史
50年前人们已经了解半导体材料可产生光线的基本知识，第一个商用二极管产生于1960年。LED是英文light emitting diode（发光二极管）的缩写，它的基本结构是一块电致发光的半导体材料，置于一个有引线的架子上，然后四周用环氧树脂密封，即固体封装，所以能起到保护内部芯线的作用，所以LED的抗震性能好。
发光二极管的核心部分是由P型半导体和N型半导体组成的晶片，在P型半导体和N型半导体之间有一个过渡层，称为P-N结。在某些半导体材料的PN结
42
本科生毕业设计（论文）
中，注入的少数载流子与多数载流子复合时会把多余的能量以光的形式释放出来，从而把电能直接转换为光能。PN结施加反向电压时，少数载流子难以注入，故不发光。这种利用注入式电致发光原理制作的二极管叫发光二极管，通称LED。 当它处于正向工作状态时（即两端加上正向电压），电流从LED阳极流向阴极时，半导体晶体就发出从紫外到红外不同颜色的光线，光的强弱与电流有关。
最初LED用作仪器仪表的指示光源，后来各种光色的LED在交通信号灯和大面积显示屏中得到了广泛应用，产生了很好的经济效益和社会效益。以12英寸的红色交通信号灯为例，在美国本来是采用长寿命、低光效的140瓦白炽灯作为光源，它产生2000流明的白光。经红色滤光片后，光损失90%，只剩下200流明的红光。而在新设计的灯中，Lumileds公司采用了18个红色LED光源，包括电路损失在内，共耗电14瓦，即可产生同样的光效。 汽车信号灯也是LED光源应用的重要领域。
对于一般照明而言，人们更需要白色的光源。1998年白光的LED开发成功。这种LED是将GaN芯片和钇铝石榴石（YAG）封装在一起做成。GaN芯片发蓝光（λp=465nm，Wd=30nm），高温烧结制成的含Ce3+的YAG荧光粉受此蓝光激发后发出黄色光射，峰值550nm。蓝光LED基片安装在碗形反射腔中，覆盖以混有YAG的树脂薄层，约200-500nm。 LED基片发出的蓝光部分被荧光粉吸收，另一部分蓝光与荧光粉发出的黄光混合，可以得到得白光。现在，对于InGaN/YAG白色LED，通过改变YAG荧光粉的化学组成和调节荧光粉层的厚度，可以获得色温3500-10000K的各色白光。这种通过蓝光LED得到白光的方法，构造简单、成本低廉、技术成熟度高，因此运用最多。
上个世纪60年代，科技工作者利用半导体PN结发光的原理，研制成了LED发光二极管。当时研制的LED，所用的材料是GaASP，其发光颜色为红色。经过近30年的发展，现在大家十分熟悉的LED，已能发出红、橙、黄、绿、蓝等多种色光。然而照明需用的白色光LED仅在近年才发展起来，这里向读者介绍有关照明用白光LED。
导体发光二极管(LED)作为第三代半导体照明光源。这种产品具有很多梦幻般优点：(1)光效率高：光谱几乎全部集中于可见光频率，效率可以达到80%-90%。而光效差不多的白炽灯可见光效率仅为10%-20%。(2)光线质量高：由于光谱中没有紫外线和红外线，故没有热量，没有辐射，属于典型的绿色照明光源。(3)能耗小：单体功率一般在0.05-1w，通过集群方式可以量体裁衣地满足不同的需要，浪费很少。以其作为光源，在同样亮度下耗电量仅为普通白炽灯的1/8-10。(4)寿命长：光通量衰减到70%的标准寿命是10万小时。一个半导体灯正常情况下可以使用50年，即使长命百岁的人，一生最多也就用2只灯。(5)可靠耐用：没有
43