B. Modifying the C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\vpxd.cfg file and adjustingthe xml tag

C. Modifying the C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\vpxd.cfg file and adjusting the xml tag D. Modifying the

C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\firstboot\\vpxd-service-spec.propfile and adjusting the xml tag Answer: A,B Explanation:

QUESTION NO: 38

What are two ways to identify TCP/IP stack information? (Choose two.) 确定TCP / IP堆栈信息的两种方法是啥？ A. Using the vSphere Web Client 使用vSphere Web客户端

B. Using esxcli network ip netstack 使用esxcli网络ip netstack C. Using esxcfg-netstack 使用esxcfg-netstack D. Using the vSphere Client 使用vSphere客户端 Answer: A,B Explanation:

QUESTION NO: 39

Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.) vSphere x 6.支持哪两个光纤通道分区选项 A. Single-Initiator

B. Single-Initiator-Single-Target C. Multiple-Initiators-Single-Target D. Multiple-Initiators-Multiple-Targets Answer: A,B Explanation:

QUESTION NO: 40

Which two parameters are required when adding an iSCSI target to an iSCSI Software Adapter using Dynamic Discovery? (Choose two.)

当添加一个iSCSI目标到一个iSCSI使用动态发现的软件适配器时需要哪两个参数? A. The iSCSI device's IP Address or Fully Qualified Domain Name iSCSI设备的IP地址或完全限定域名 B. The Port Number 端口号

C. The iSCSI device's iSCSI Qualified Name (IQN) iSCSI设备的iSCSI限定名(IQN) D. The Default Gateway IP Address 默认网关的IP地址 Answer: A,B

Explanation:

QUESTION NO: 41

What is true regarding datastores on ESXi 6.x? 什么是真正可当作ESXi 6. X的数据存储

A. NFS 4.1 datastore does not support Fault Tolerance (FT) 不支持容错(FT)的NFS 4.1数据存储

B. VMFS3 and VMFS5 datastores can be newly created 可以新创建的VMFS3和VMFS5数据存储

C. NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another 可以同时使用NFS4.1挂载在一个主机和NFS在另一个的NFS数据存储 D. NFS 3.0 datastore does not support Fault Tolerance (FT) 不支持容错(FT)的NFSNFS 3.0数据存储 Answer: A Explanation:

QUESTION NO: 42

Which type of Adapter does not require vmkernel networking? 哪种类型的适配器不需要vmkernel网络? A. Independent Hardware iSCSI Adapter 独立硬件的iSCSI适配器

B. Dependent Hardware iSCSI Adapter 依赖硬件iSCSI适配器 C. Software iSCSI Adapter 软件iSCSI适配器

D. Software FCoE Adapter 软件FCoE适配器 Answer: A Explanation:

QUESTION NO: 43

What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.) vSphere 6. x使用NFS4.1相比NFS 3 的两个好处是? A. NFS 4.1 supports Kerberos Authentication NFS 4.1 支持Kerberos远程准入 B. NFS 4.1 supports multipathing NFS 4.1 支持多路径 C. NFS 4.1 supports IPv6 NFS 4.1 支持 IPv6

D. NFS 4.1 supports hardware acceleration NFS 4.1 支持硬件加速 Answer: A,B Explanation:

QUESTION NO: 44

Which two storage controller configurations can be used with Virtual SAN? (Choose two.) 哪两个存储控制器配置可用于虚拟SAN? A. SAS controllers in Passthrough mode

透传模下SAS控制器

B. SAS controllers in RAID0 mode RAID0模式下的SAS控制器 C. SAS controllers in RAID1 mode RAID1模式下的SAS控制器

D. SAS controllers in RAID10 mode RAID10模式下的SAS控制器 Answer: A,B Explanation:

QUESTION NO: 45

A company has decided to implement Virtual SAN within their vSphere 6.x environment.

The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list.

公司决定在vSphere 6. x环境实施虚拟SAN。虚拟SAN群将由三个在虚拟SAN ESX Ready Node列表的ESXi 6.x主机组成。 Each ESXi host includes: 每个ESXi主机包括

- Two SAS Controllers that support Passthrough Mode 支持透传模式的两个SAS控制器

- Four Solid State Drives (SSDs) 1TB in size each 四个1 tb大小的固态硬盘(ssd)

- 20 SAS Magnetic Disks (MDs) 1TB in size each 201 tb大小的SAS磁盘(MDs)

- The SSDs and MDs are evenly split between the two SAS controllers ssd和MDs平均分布在两个SAS控制器中

The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode.

公司将试用一个利用VMware最优方法且存储容量最大化的虚拟SAN群。虚拟SAN群将使用手动模式。

Which two Disk Group configurations would meet the stated configuration requirements? (Choosetwo.)

哪两个磁盘阵列满足所述配置要求？

A. 4 disk groups with 1 SSD and 5 MDs each

每一个包含1个SSD和5个MDs的4个磁盘阵列 B. 2 disk groups with 1 SSD and 7 MDs each

每一个包含1个SSD和7个MDs的2个磁盘阵列 C. 2 disk groups with 2 SSDs and 7 MDs each

每一个包含2个SSD和7个MDs的2个磁盘阵列 D. 2 disk groups with 1 SSD and 10 MDs each

每一个包含1个SSD和10个MDs的2个磁盘阵列 Answer: A,B Explanation:

QUESTION NO: 46

An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network.

管理员在一个二层网络创建一个新的虚拟SAN 群。有一个现有的虚拟圣集群在相同的2层网络

Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster?(Choose two.)

以下哪两个操作将允许新的虚拟SAN 群与现有的SAN 群群共存

A. Change the default Multicast Address on the new Virtual SAN cluster. 更改新虚拟SAN 群的默认多点播送地址。

B. Change the default Unicast Address on the new Virtual SAN Cluster. 更改新虚拟SAN 群的默认单一播送地址 C. Create a separate VLAN for each cluster. 给每个群创建一个独立的VLAN

D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter. 为虚拟SAN网络适配器创建一个VMkernel ARP别名 Answer: A,C Explanation:

QUESTION NO: 47

Which two Virtual SAN related actions might start resynchronization of virtual machine objects?(Choose two.)

哪两个虚拟SAN 群的相关动作可能会启动虚拟机对象同步？

A. Editing a virtual machine storage policy to increase the number of replicas. 编辑虚拟机存储策略来增加副本的数量

B. Editing a virtual machine storage policy to reduce the number of replicas. 编辑虚拟机存储策略来减少副本的数量

C. Editing a virtual machine storage policy to increase the number of disk stripes. 编辑虚拟机存储策略来提高磁盘条纹的数量

D. Editing a virtual machine storage policy to reduce the number of disk stripes. 编辑虚拟机存储策略来减少磁盘条纹的数量 Answer: A,C Explanation:

QUESTION NO: 48

Which two NFS Protocol versions does vSphere 6 support? (Choose two.) vSphere 6支持哪两个NFS协议版本 A. Version 3 版本3

B. Version 3.1 版本3.1 C. Version 4 版本4

D. Version 4.1 版本4.1 Answer: A,D Explanation: